Refitting

1. Remove the unit from the steering wheel with your hands only. In this phase, if the unit has not been triggered, it is operative.

Place the unit in a protected place and in such a way that nothing can get inside.

1. Lift the inflating device rotating lock peg as shown in the figure.

1. Using your hands only, turn the inflating device anti-clockwise by approximately 45° until the retaining flaps on the device align with the adapter ring. Extract the device from the adapter ring.

1. Note the device identification number (written on the device) in a ledger.

Refitting

Inspect the removed parts with care. Check there are no faults such as dents, breakages or cracks which could compromised airbag operation.

• Position the airbag unit and rotate it clockwise to fasten it in the adapter ring.
• Position the airbag unit and screw the four screws fastening it to the dashboard.
• Refit the two tabs (next to the steering wheel) covering the unit screws.