Refitting

Refitting

Never knock or shake the ECU.

Do not connect the ECU to the electric system until it is rigidly connected to the vehicle as the system could be triggered when powered if not perfectly secured.

Make sure the battery is however disconnected.

1. Fit the ECU in its seat and align the arrow on the metal ECU container with the direction of vehicle movement.

• Fasten the three nuts securing the ECU to the welded plate on the body.

• Reconnect the ECU electric connection.
• Turn the ECU cover and fasten the two nuts.

5580C18 - AIRBAG MODULE - R.R. (MECHANICAL)

Before removing and refitting an airbag module, perform to the following preliminary operations: Turn the ignition key to STOP. Remove it. Disconnect and insulate the battery cables. Wait for 10 minutes before proceeding.

Attain to all the safety precautions (See 5580C - PRECAUTIONS).

Removal

1. Lift the tabs covering the airbag unit fastening screws.

1. Remove the airbag unit fastening screws shown in the figure.

(Cont.d)