R.R. FRONT BUMPER

Operation 7210E10 · External parts

Removing

Place the car on a lift.

- 7055B54 under-engine guard - r r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 4450B12 front or rear wheels (two) - r+r

1. Undo the upper fixing bolts.

Raise the lift halfway.

2. Undo the side fixing bolts at the wheel arch on both sides.

Raise the lift.

3. Undo the fixing bolts (3a) and remove the front bumper (3b).

Refitting

Check that the bumper is undamaged.

Place the bumper in position.

Tighten the lower bolts fixing the bumper.

Lower the lift fully.

Tighten the side fixing bolts at the wheel arch on both sides.

Lower the ramp.

Tighten the upper bolts.

- 4450B12 front or rear wheels (two) - r+r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 7055B54 under-engine guard - r r

Remove the vehicle from the lift.