R r rear sacrificial beam
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Removing refitting › R r rear sacrificial beam
R r rear sacrificial beam
Removing
1. Undo the fixing bolts (1a) on both sides and remove the sacrificial crossmember (1b).
Removing
- 5530B56 BATTERY DRIP TRAY COVER - R.R.
Disconnect the battery negative terminal.
| Name | Connector | |
|---|---|---|
| Battery | A1 |
1. Undo the fixing nuts (1a) and remove the crossmember (1b) from the vehicle.
Refitting
Position the sacrificial crossmember and tighten the bolts to torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | ADDITIONAL BODYSHELL REAR CROSSMEMBER | M8 | 3 |
Refitting
Position the crossmember and tighten the nuts fixing it to the bodyshell to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1a | Nut | ADDITIONAL BODYSHELL REAR CROSSMEMBER | M8 | (Bodyshell) 3 |
Connect the battery negative terminal.
| Name | Connector | |
|---|---|---|
| Battery | A1 |
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.