Thermostat - r + r with cylinder head removed

Make

Fiat

Model

Stilo Factory Service Manual

Year

2001–2007

Section

Engine cooling › Thermostat - r + r with cylinder head removed

EngineThermostat - r + r with cylinder head removed

Thermostat - r + r with cylinder head removed

Operation 1088C42 · Water pump and thermostat

1.9 JTD 8v

Removing

1. Undo the bolts (1a) and remove the thermostat (1b) complete with pipe and sensor.

2. Remove the gasket.

Refitting

Place the gasket back in its housing.

Place the thermostat, complete with pipes and sensor, back in its housing and tighten the bolts to the recommended torque.

	Fastening	Component	Ø	Value (daNm)
	Bolt	THERMOSTAT	M8	(Cylinder head side) 2.3 ÷ 3.3

08 Engine