Thermostat- r + r

Operation 1088C40 · Water pump and thermostat

1.9 JTD 16v

Removing

Place the car on a lift.

- 1016A10 sound-proofing cover - r + r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

Raise the vehicle.

- 7055B54 under-engine guard - r r

1. Disconnect the coolant return pipe from the engine coolant reservoir.

2. Disconnect the upper coolant inlet hose to the radiator.

3. Disconnect the coolant supply pipe to the climate control system heater.

4. Disconnect the E.G.R. system water/exhaust gas heat exchanger coolant supply pipe.

Collect the coolant which comes out in a suitable container.

5. Disconnect the electrical connection from the engine coolant temperature sensor.

1. Undo the bolts (1a) and remove the thermostat (1b) complete with O-Ring (1c).

Refitting

Fit the thermostat complete with O-Ring.

Screw in the fixing bolts tightening them to the recommeded torque.

Connect the electrical connection to the engine coolant temperature sensor.

Connect the coolant supply pipe to the E.G.R. system water/exhaust gas heat exchanger.

Connect the coolant supply pipe to the climate control system heater.

Connect the upper radiator coolant inlet hose.

Connect the coolant return pipe to the coolant supply reservoir.

- 7055B54 under-engine guard - r r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 0010T20 coolant change

- 1016A10 sound-proofing cover - r + r

Remove the vehicle from the ramp.