Discovery II
RESTRAINT SYSTEMS
REPAIRS
75-27
6. Connect deployment tool fly lead LRT-86-003/
04 to air bag.
7. Connect deployment tool LRT-86-003 to
deployment tool fly lead LRT-86-003/04.
8. Connect deployment tool LRT-86-003 to
battery.
WARNING: Ensure all personnel are at least
15 metres (50 feet) away from the air bag
module.
9. Press deployment tool operating button to
deploy air bag module.
10. Disconnect deployment tool from battery.
WARNING: During deployment parts of the
air bag module become hot enough to burn
you. Wait 30 minutes after deployment
before touching the air bag module.
11. Disconnect deployment tool fly lead from air
bag.
12. Do not re-use or salvage any parts of the
SRS system.
NOTE: Do not transport deployed SRS
components in the vehicle passenger
compartment.
Air bag - fascia - passenger - deployment
- off vehicle
$% 76.74.18
These guidelines are written to aid authorised
personnel to carry out the safe disposal of air bag
modules when removed from the vehicle.
Deploy
It is imperative that before any work is
undertaken on the SRS system, the
appropriate information is read thoroughly.
1. Check condition of deployment tool LRT-86-
003 and associated fly leads.
2. Position LRT-86-007/03 in vice, ensuring that
vice jaws grip tool above the bottom flange to
prevent possibility of tool being forced upwards
during detonation. Tighten vice.
3. Fit and secure 2 off LRT-86-007/04 to LRT-86-
007/03.