Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)09 · Engine management system - EDC
09 · Engine

Sensor - mass air flow (maf)

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Repairs › Sensor - mass air flow (maf)
Engine management system - EDCSensor - mass air flow (maf)

SENSOR - MASS AIR FLOW (MAF)

Service repair no - 19.22.25

Remove

  1. Disconnect battery earth lead.
Sensor - mass air flow (maf) – Disconnect battery earth lead.
  1. Disconnect multiplug from MAF sensor.
  2. Release clip securing air intake hose to MAF sensor and disconnect hose.
  3. Release 2 clips securing MAF sensor to air filter.
  4. Remove MAF sensor.
  5. Remove and discard ’O’ ring.

Refit

  1. Clean ’O’ ring recess in air filter.
  2. Fit NEW ’O’ ring to MAF sensor.
  3. Fit MAF sensor to air filter, secure with clips.
  4. Fit clip to intake hose.
  5. Connect intake hose to MAF sensor and secure clip.
  6. Connect multiplug to MAF sensor.
  7. Connect battery earth lead.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.