L322 Range Rover Service Procedures
CHARGING AND STARTING
86-1-2
REPAIRS
Alternator - V8
$% 86.10.02
Before disconnecting the battery, ensure all text and
cautions in the battery disconnection section are
observed.
GENERAL INFORMATION, Electrical
Remove
1. Position vehicle on lift.
2. Disconnect battery earth lead.
3. Drain cooling system
ADJUSTMENTS, Coolant - drain, flush &
refill.
4. Remove viscous coupling.
5. Remove ancillary drive belt tensioner.
REPAIRS, Tensioner - ancillary drive belt -
V8.
6. Release clip and disconnect radiator top hose
from radiator.
7. Release clips and disconnect radiator top hose
from coolant pump and alternator.
8. Position hose aside.
9. Disconnect pipe from charcoal canister purge
control valve, release valve from bracket and
position valve aside.
10. Release battery lead from securing clip on
engine timing cover.
11. Disconnect multiplug from alternator.
12. Remove nut and disconnect battery cable from
alternator.
13. Release alternator harness from securing clip
on alternator.
