L322 Range Rover Service Procedures
CHARGING AND STARTING
86-1-4
REPAIRS
Ancillary drive belt - V8
$% 86.10.03
Before disconnecting the battery, ensure all text and
cautions in the battery disconnection section are
observed.
GENERAL INFORMATION, Electrical
Remove
1. Disconnect battery earth lead.
2. Loosen 2 ancillary drive belt tensioner bolts.
3. Using a 17 mm (11/16 in') spanner, rotate belt
tensioner fully clockwise to release tension on
ancillary drive belt.
4. Hold tensioner in retracted position and tighten
tensioner clamping bolt.
5. Release ancillary drive belt from tensioner
pulley.
6. Release and remove ancillary drive belt from
remaining pulleys.
7. Slowly rotate fan by hand while positioning
ancillary drive belt over fan blades between fan
and fan cowl to remove belt.