Land Rover Workshop Service and Repair Manuals

DOORS

REPAIRS 76-1-17

10. Remove internal release cable and latch as an 

assembly.

11. Open security flap on latch.
12. Release interior release cable clamp from 

latch.

13. Disengage interior release cable from latch.
14. Remove cable.

Refit

1. Secure interior release cable to latch and close 

latch security flap.

2. Position latch to door. On drivers door, align 

lock barrel paddle to latch.

3. Position door latch fit Torx screws and tighten 

to 10 Nm (7 lbf.ft).

4. Connect outer release cable to latch assembly.
5. Connect multiplug to door latch.
6. Fit sill button lock rod to latch.
7. Check operation of door latch.
8. Fit plastic sheet.

 + 

 DOORS, REPAIRS, Plastic sheet - 

front door.
 

 + 

 DOORS, REPAIRS, Plastic sheet - 

rear door.

Latch - tailgate 

$% 76.37.17

Remove

1. Remove tailgate trim casing.

 + 

 DOORS, REPAIRS, Trim casing - 

tailgate upper.

2. Remove 4 Torx bolts securing latch and 

support bracket to tailgate.

3. Disconnect multiplug from latch.
4. Remove latch assembly.

NOTE: Do not carry out further dismantling if 
component is removed for access only.

5. Disconnect manual release cable.
6. Remove 3 Torx bolts securing support bracket 

to latch. Remove bracket.

M76 4489

M76 4501