Trim Casing - Rear Door Repair Procedures
DOORS
REPAIRS 76-1-11
Trim casing - rear door
$% 76.34.04
Remove
1. Remove 3 screws securing trim casing to door.
2. Release access cover in trim casing and
remove screw.
3. Carefully release 11 clips securing trim casing
to door.
4. Ensure centre trim casing clip is released.
5. Release 6 clips securing door casing to inner
glass seal horizontally, avoid damage to
locking button on final release.
6. Release door operating cable from door casing
and move aside.
7. Disconnect 3 multiplugs from door harness and
remove trim casing.
NOTE: Do not carry out further dismantling if
component is removed for access only.
8. Remove 3 Torx screws securing speaker to
trim casing and remove speaker
M76 4301