L322 Range Rover Service Procedures
DOORS
76-1-12 REPAIRS
9. Remove 11 clips from trim casing.
10. Remove retaining clip from door handle
reinforcement bracket.
11. Remove 2 nuts securing door handle
reinforcement bracket and remove bracket.
12. Remove Torx screw securing door pocket
finisher to casing. Remove finisher.
13. Depress clip and remove trim casing light
assembly.
14. Carefully release window lift switch from trim
casing.
15. Remove access cover from door casing.
Refit
1. Fit access cover to door casing.
2. Position switch pack to door casing, align and
secure clips.
3. Fit inner door pocket finisher and secure with
screw.
4. Position outer door pocket finisher to clips, fit
nuts and tighten to 3 Nm (2.2 lbf.ft).
5. Position door handle reinforcement bracket, fit
nuts and tighten to 6 Nm (4.4 lbf.ft).
6. Fit and secure clip to reinforcement bracket.
7. Fit door casing retaining clips.
8. Fit speaker to trim casing and secure with Torx
screws.
9. Connect multiplugs.
10. Connect cable to interior door release.
11. Fit rear door trim casing.
12. Fit screws securing door trim casing.
13. Position and secure screw cover.