L322 Range Rover Service Procedures
DOORS
76-1-4
REPAIRS
6. Remove Torx bolt securing glass to regulator.
7. Remove glass.
Refit
1. Position glass to regulator, fit bolt and tighten to
10 Nm (7 lbf.ft).
2. Fit glass channel to frame and secure with
screws.
3. Fit and secure seal.
4. Connect multiplug, fit and secure upper
finisher.
5. Fit plastic sheet.
DOORS, REPAIRS, Plastic sheet -
6. Raise and lower glass to check operation.
Quarter light - fixed - rear door
$% 76.31.31
Remove
1. Remove rear door glass.
2. Remove 3 screws securing rear finisher to
frame and remove finisher.
3. Remove rear finisher retaining clips from door
frame.
4. Remove top finisher from door.
M76 4497
M76 4498