Rear Shock(64.30.02.45) (page 3 of 4)

Installation  

10 . 

  Remove the shock absorber from the vise. 

1 . 

  Install the shock absorber in the vise. 

2 . 

  Clean the components. 

3 . 

  Lubricate and install new O-rings to the seal carrier. 

4 . 

  Install the spring aid and rebound plate. 

5 . 

  Install the air spring. 

Align the piston with the first O-ring seal, making sure the location tag is correctly aligned.

6 . 

  Install the new O-ring seals and spacer, taking care not to damage the seals. 

7 . 

  Install the rubber bushing and rebound washer.