Range Rover P38
EMISSION CONTROL
3
REPAIR
EVAP CANISTER - from 99MY
Service repair no - 17.15.13
Remove
1. Release fixings and remove battery cover.
2. Disconnect battery earth lead.
3. Raise vehicle on lift.
4. Release clip and disconnect air hose from
canister.
5. Release and remove purge and tank pipes from
canister.
6. Remove 2 nuts and 2 bolts securing EVAP
canister to chassis.
7. Remove EVAP canister.
8. Remove bolt securing bracket to canister and
remove canister.
CAUTION: Plug the connections.
Refit
9. Fit bracket to canister and secure with bolt.
10. Fit canister to chassis and secure with nuts and
bolts.
11. Ensure all connections are clean.
12. Connect purge and tank pipes to canister.
13. Connect air hose to canister and secure hose
with clip.
14. Lower vehicle.
15. Connect battery earth lead.
16. Fit battery cover and secure with fixings.