Range Rover P38
EMISSION CONTROL
5
REPAIR
PURGE VALVE - up to 97MY
Service repair no - 17.15.39
Remove
1. Disconnect multiplug from purge valve.
2. Disconnect hoses from EVAP canister and ram
pipe housing.
3. Remove bolt securing valve to shock absorber
turret. Remove purge valve.
Refit
4. Reverse removal procedure.
PURGE VALVE - 97MY to 99MY
Service repair no - 17.15.39
Remove
1. Disconnect multiplug from purge valve.
2. Depress quick release connector tabs and
disconnect hose from throttle housing.
3. Depress quick release connector tabs and
disconnect hose from EVAP canister.
4. Remove bolt securing purge valve to shock
absorber turret.
5. Remove purge valve.
Refit
6. Position purge valve to shock absorber turret.
7. Fit and tighten bolt securing purge valve to
shock absorber turret.
8. Clean hose connections.
9. Connect hoses to EVAP canister and throttle
housing.
NOTE: Ensure connections are correctly
engaged by gently pulling hose
connections.
10. Connect multiplug to purge valve.