Range Rover P38
EMISSION CONTROL
11
REPAIR
RESERVOIR - VACUUM - SECONDARY AIR
INJECTION (SAI)
Service repair no - 17.25.04
Remove
1. Disconnect 2 vacuum hoses from reservoir.
2. Remove bolt securing reservoir to mounting
bracket and collect reservoir.
Refit
3. Position reservoir to mounting bracket and
tighten bolt to
10 Nm (7 lbf.ft) .
4. Connect vacuum hoses to reservoir.
PUMP - SECONDARY AIR INJECTION (SAI)
Service repair no - 17.25.07
Remove
1. Disconnect multiplug from air pump.
2. Release clip and disconnect air hose from air
pump.
3. Remove 3 nuts securing air pump to mounting
bracket and remove pump.
4. Remove 3 mountings from air pump.
Refit
5. Fit mountings to air pump and tighten to
10 Nm
(7 lbf.ft) .
6. Fit air pump to mounting bracket and tighten
nuts to
10 Nm (7 lbf.ft) .
7. Connect air hose and secure with clip.
8. Connect multiplug to air pump.
