Range Rover P38
EMISSION CONTROL
1
REPAIR
CATALYST HEAT SHIELDS
Service repair no - 17.50.05
Remove
1. Remove exhaust front pipe.
See MANIFOLD
AND EXHAUST SYSTEM, Repair.
2. Remove 5 retaining washers securing heat
shield to floor pan studs.
3. Remove heat shield. Discard retaining washers.
Refit
4. Reverse removal procedure.
EVAP CANISTER - PRE-ADVANCED EVAPS
Service repair no - 17.15.13
Remove
1. Disconnect fuel tank vapour and purge valve
hoses from canister.
2. Remove bolt and clamp plate securing canister
to mounting plate.
3. Remove EVAP canister.
Refit
4. Reverse removal procedure.