Range Rover P38
57
STEERING
NEW RANGE ROVER
14
REPAIR
POWER STEERING PUMP - DIESEL
Service repair no - 57.20.15
Remove
1. Raise vehicle on four post lift.
2. Disconnect battery negative lead.
3. Raise lift.
4. Slacken 3 bolts securing pulley to steering
pump. Do not remove bolts.
5. Release alternator belt tension using a suitable
lever beneath tensioner damper as shown.
Release drive belt from steering pump pulley.
6. Remove pulley bolts. Collect pulley.
7. Position container beneath power steering pump
to catch spillage.
8. Remove 4 bolts securing steering pump.
Release pump from bracket.
9. Disconnect low pressure hose from pump.
10. Remove banjo bolt securing high pressure pipe
to pump. Discard sealing washers.