Range Rover P38
STEERING
1
REPAIR
STEERING COLUMN
Service repair no - 57.40.01
WARNING: Under no circumstances must
any form of lubricant be applied to the
steering column. If noise or harshness is
present in the column a new unit must be fitted
Remove
1. Disconnect battery negative lead.
WARNING: If vehicle is fitted with SRS,
disconnect both battery terminals. Always
disconnect negative terminal first.
2. Remove intermediate steering shaft.
See this
section.
3. Remove 4 scrivet fasteners securing closing
panel beneath steering column.
4. Release closing panel from fascia. Disconnect
footwell lamp multiplug, remove panel.
5. Remove steering column nacelle.
See this
section.
6. Remove screws securing indicator switch stalk
to column. Release stalk, remove from multiplug.
7. Remove screws securing wiper switch stalk to
column. Release stalk, remove from multiplug.
8. Disconnect ignition switch, ’key in’ sensor, rotary
coupler and SRS system multiplugs.