Range Rover P38
STEERING
9
REPAIR
COLUMN NACELLE
Service repair no - 57.40.29
Remove
1. Remove ignition key.
2. Remove instrument binnacle.
See
INSTRUMENTS, Repair.
3. Release steering column tilt lever, fully extend
and tilt column down.
4. Remove 2 screws securing upper column
nacelle.
5. Release upper column nacelle from side fillet
clips and remove upper nacelle.
6. Remove 4 screws securing lower nacelle,
disengage from side fillet clips and remove
nacelle.
7. Collect side fillets.
Refit
8. Position upper and lower nacelles, loosely fit
screws.
9. Position side fillets, engage clips.
10. Tighten nacelle screws.
11. Fit instrument binnacle.
See INSTRUMENTS,
Repair.
12. Return steering column to original position.
13. Fit ignition key.
OIL RESERVOIR
Service repair no - 57.15.08.
Remove
1. Place tray to catch fluid.
CAUTION: Power steering fluid damages
paintwork. Any spillage must be cleaned
immediately.
2. Disconnect battery negative lead.
3. Remove clips securing hoses to reservoir.
Release hoses.
4. Slacken clamp screw securing reservoir.
Remove reservoir.
Refit
5. Position reservoir. Tighten clamp screw.
6. Connect hoses to reservoir. Secure with new
clips.
7. Fill reservoir.
See LUBRICANTS, FLUIDS AND
CAPACITIES, Information.
8. Reconnect battery negative lead.
9. Bleed power steering.
See this section.
