Range Rover P38
STEERING
5
REPAIR
STEERING DAMPER
Service repair no - 57.55.21
Remove
1. Raise the vehicle.
WARNING: Support on safety stands.
2. Remove damper fixings at both ends.
3. Remove damper.
Refit
4. Fit damper to chassis. Fit, but do not tighten nut
and bolt.
5. Fit damper to drag link, fit nut and bolt, tighten
to:-
Up to 97 MY -
125 Nm (92 lbf.ft)
97 MY on -
50 Nm (37 lbf.ft)
6. Tighten damper to chassis fixing. Tighten to
125Nm. (92 lbf.ft)
7. Remove safety stands. Lower vehicle.
PUMP FEED HOSE
Service repair no - 57.15.20
Remove
CAUTION: Seal all disconnected pipes and
ports to prevent ingress of dirt.
1. Disconnect battery earth lead.
2. Remove strap securing coolant top hose to
engine lifting bracket.
3. Release feed hose clips. Remove hose.
Refit
4. Reverse removal procedure.
5. Bleed power steering.
See this section.