Range Rover Classic
BRAKES
11
REPAIR
9. Using piston clamp LRT-70-500 press each
piston back into its bore. Ensure that displaced
brake fluid does not overflow from reservoir.
10. Coat faces of pistons with brake fluid, keeping it
away from lining material.
Refit
11. Insert brake pads, ensuring pad with wear
indicator is fitted to inboard side RH caliper.
12. Fit pad retaining pins and anti-rattle springs.
Secure with new split pins. Reconnect pad
sensor wear plug.
13. Apply service brake pedal several times to locate
pads.
14. Check fluid reservoir. Top up if necessary, using
correct grade of fluid.
See LUBRICANTS,
FLUIDS AND CAPACITIES, Information,
Recommended Lubricants and Fluids
REAR BRAKE PADS
Service repair no - 70.40.03
Service tool:
LRT-70-500 - Piston clamp
Remove
1. Remove rear road wheels.
See WHEELS AND
TYRES, Repair, Wheels
2. Disconnect battery negative lead.
3. Disconnect pad wear sensor plug (rear RH side
only).
4. Clean exterior of calipers.
5. Remove pad retaining pins and springs.
6. Remove brake pads.
7. Clean exposed parts of pistons, using new brake
fluid.
8. Using piston clamp LRT-70-500 press each
piston back into its bore. Ensure that displaced
brake fluid does not overflow from reservoir.
9. Coat faces of pistons with brake fluid, keeping it
away from lining material.