BLOWER MOTOR
- Make
- Land Rover
- Model
- Range Rover Classic
- Section
- REPAIR › BLOWER MOTOR
80
HEATING AND VENTILATION
6
REPAIR
BLOWER MOTOR UNIT - HEATER AND AIR
CONDITIONING
Service repair no - 80.20.17
Service repair no - 82.25.54.
Remove
1. Move seats to rear most position.
2. Disconnect battery negative lead.
3. Remove fascia panel assembly.
See CHASSIS
AND BODY, Repair, Dash Panel Assembly
4. Remove 2 nuts securing lower brackets to
toeboard.
5. Manoeuvre blower unit from heater unit and
remove.
Refit
6. Reverse removal procedure. Ensure seal
between blower and heater unit is tight.
BLOWER MOTOR
Service repair no - 80.20.17
Service repair no - 82.25.33.
Remove
1. Remove blower motor unit.
See Blower Motor
Unit - Heater and Air Conditioning
2. Release wiring harness retaining clip.
3. Remove 3 screws securing casing.
4. Remove blower motor assembly.
Parts & tools for this job For Land Rover Range Rover
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Land Rover Range Rover cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.