landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

CONDENSER FANS AND MOTORS > < COMPRESSOR
Page 685
background image

82

AIR CONDITIONING

6

REPAIR

CONDENSER

Service repair no - 82.15.07

Remove

1. Disconnect battery negative lead.

WARNING: Wear eye and hand protection
when disconnecting components
containing refrigerant. Plug all exposed

connections immediately.

2. Recover refrigerant from system.

See

Adjustment, Refrigerant Recovery Recycling
Recharging

3. Remove front grille panel.
4. Remove battery.

See ELECTRICAL, Repair,

Battery

5. Remove radiator and oil coolers assembly.

See

COOLING SYSTEM, Repair, Radiator/Oil
Coolers

6. Disconnect high and low pressure pipes at

condenser unions.

7. Discard ’O’ ring seal from each union.

8. Remove 2 bolts securing condenser to body.
9. Pull condenser into radiator area.

10. Disconnect multiplug from each fan lead.
11. Remove condenser assembly.

Do not carry out

further dismantling if component is removed
for access only. 
Blank off inlet and outlet ports.

CONDENSER FANS AND MOTORS > < COMPRESSOR