Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)11 · Engine management system - EDC
11 · Engine

Engine coolant temperature (ect) sensor

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Engine coolant temperature (ect) sensor
Engine management system - EDCEngine coolant temperature (ect) sensor

ENGINE COOLANT TEMPERATURE (ECT) SENSOR

Service repair no - 18.30.10

Remove

  1. Remove engine acoustic cover. See BODY, Exterior fittings.
Engine coolant temperature (ect) sensor – Remove engine acoustic cover. See BODY, Exterior fittings.
  1. Remove bolt securing brake servo vacuum pipe to coolant outlet elbow.
  2. Remove bolt securing vacuum pipe to camshaft cover and move pipe aside.
  3. Disconnect multiplug from ECT sensor.
  4. Position drain tray to collect any spillage.
  5. Remove ECT sensor from coolant outlet elbow.

Refit

  1. Apply Loctite 577 to threads of ECT sensor.
  2. Fit ECT sensor to outlet elbow and tighten to 15 Nm.
  3. Fit bolt securing brake servo vacuum pipe to camshaft cover and tighten to 10 Nm.
  4. Fit bolt securing brake servo hose to coolant outlet elbow and tighten to 25 Nm.
  5. Connect multiplug to ECT sensor.
  6. Top-up cooling system. See MAINTENANCE.
  7. Fit engine acoustic cover. See BODY, Exterior fittings.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.