Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)15 · Manifold & exhaust systems
15 · Engine

Front pipe - ’K16’

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Front pipe - ’K16’
Manifold & exhaust systemsFront pipe - ’K16’

FRONT PIPE - ’K16’

Service repair no - 30.10.09

Remove

  1. Raise vehicle on a 4 post ramp.
Front pipe - ’k16’ – Raise vehicle on a 4 post ramp.
  1. Remove 3 nuts securing front pipe to catalytic converter.
  2. Release mounting rubber from bracket.
Front pipe - ’k16’ – Release mounting rubber from bracket.
  1. Remove 4 flange nuts securing front pipe to manifold.
  2. Release front pipe from manifold and remove from catalytic converter.
  3. Remove flange gaskets.

Refit

  1. Clean pipe flanges.
  2. Fit new gasket to catalytic converter flange.
  3. Fit front pipe to catalytic converter, fit flange nuts but DO NOT tighten.
  4. Fit new gasket to manifold flange.
  5. Fit front pipe to manifold flange, fit nuts and tighten to 50 Nm.
  6. Tighten nuts securing front pipe to catalytic converter to 50 Nm.
  7. Secure front pipe rubber mounting to bracket on body.
  8. Lower vehicle.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.