Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)15 · Manifold & exhaust systems
15 · Engine

Inlet manifold chamber gasket - ’K16 with VVC’

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Inlet manifold chamber gasket - ’K16 with VVC’
Manifold & exhaust systemsInlet manifold chamber gasket - ’K16 with VVC’ · page 1 of 2

INLET MANIFOLD CHAMBER GASKET - ’K16 WITH VVC’

Service repair no - 30.15.37

Remove

  1. Disconnect battery earth lead.
Inlet manifold chamber gasket - ’k16 with vvc’ – Disconnect battery earth lead.
  1. Disconnect brake servo vacuum pipe from manifold chamber.
Inlet manifold chamber gasket - ’k16 with vvc’ – Disconnect brake servo vacuum pipe from manifold chamber.
  1. Release throttle cable adjusting nut from abutment bracket.
  2. Release throttle cable from throttle cam.
  3. Release clip and disconnect purge hose from manifold chamber.
  4. Release clip and disconnect breather hose from manifold chamber.
Inlet manifold chamber gasket - ’k16 with vvc’ – Release clip and disconnect breather hose from manifold chamber.
  1. Disconnect hose from IACV.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.