Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)15 · Manifold & exhaust systems
15 · Engine

Inlet manifold chamber gasket - ’K8’

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Inlet manifold chamber gasket - ’K8’
Manifold & exhaust systemsInlet manifold chamber gasket - ’K8’ · page 1 of 2

INLET MANIFOLD CHAMBER GASKET - ’K8’

Service repair no - 30.15.37

Remove

  1. Disconnect battery earth lead.
Inlet manifold chamber gasket - ’k8’ – Disconnect battery earth lead.
  1. Release clip and disconnect air intake hose from throttle housing.
Inlet manifold chamber gasket - ’k8’ – Release clip and disconnect air intake hose from throttle housing.
  1. Disconnect multiplug from IACV.
Inlet manifold chamber gasket - ’k8’ – Disconnect multiplug from IACV.
  1. Disconnect multiplug from TP sensor.
  2. Release clip and disconnect breather hose from throttle housing.
  3. Release clip and disconnect purge hose from manifold chamber.
Inlet manifold chamber gasket - ’k8’ – Release clip and disconnect purge hose from manifold chamber.
  1. Release throttle cable adjusting nut from abutment bracket.
  2. Disconnect throttle cable from throttle cam.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.