Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)22 · Steering
22 · Steering & suspension

Power steering pump drive belt - ’k’ series - with manual tensioner

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Power steering pump drive belt - ’k’ series - with manual tensioner
SteeringPower steering pump drive belt - ’k’ series - with manual tensioner

POWER STEERING PUMP DRIVE BELT - ’K’ SERIES - WITH MANUAL TENSIONER

Service repair no - 57.20.02

Remove

  1. Raise front of vehicle.

WARNING: Support on safety stands.

Power steering pump drive belt - ’k’ series - with manual tensioner – Raise front of vehicle.
  1. Loosen drive belt tensioner pulley securing bolt.
  2. Release drive belt tension by turning the tension adjusting bolt clockwise.
  3. Remove and discard drive belt.

Refit

  1. Clean pulley ’V’s.
  2. Fit new drive belt to crankshaft pulley and connect to power steering pump pulley. ensure pulley and belt grooves are correctly located.
  3. Adjust drive belt tension. See Adjustments.
  4. Rotate crankshaft one complete revolution clockwise.
  5. Re-tension drive belt by turning the tension adjusting bolt one complete turn anti-clockwise.
  6. Remove stand(s) and lower vehicle.

POWER STEERING PUMP DRIVE BELT - ’L’ SERIES

Service repair no - 57.20.02

The power steering pump is driven by the auxiliary drive belt. See ELECTRICAL, Repairs.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.