Workshop Manuals Factory service & repair Rover
Rover 400 Workshop Manual (1995-2000)28 · Air conditioning
28 · Heating & A/C

Engine high temperature switch - ’l’ series

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs › Engine high temperature switch - ’l’ series
Air conditioningEngine high temperature switch - ’l’ series

ENGINE HIGH TEMPERATURE SWITCH - ’L’ SERIES

Service repair no - 82.17.03

This is the engine overheat protection switch.

Remove

  1. Disconnect battery earth lead.
  2. Remove underbelly panel. See BODY, Exterior fittings.
  3. Position drain tray below engine oil filter.
Engine high temperature switch - ’l’ series – Position drain tray below engine oil filter.
  1. Disconnect switch multiplug from engine harness.
Engine high temperature switch - ’l’ series – Disconnect switch multiplug from engine harness.
  1. Remove temperature switch and discard sealing washer.

Refit

  1. Clean switch threads and fit NEW sealing washer.
  2. Fit temperature switch and tighten to 15 Nm.
  3. Connect switch multiplug to engine harness.
  4. Fit underbelly panel. See BODY, Exterior fittings.
  5. Top-up engine oil. See INFORMATION, Capacities, fluids and lubricants.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.