Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - D Series07 Engine - L Series08 Engine - T Series09 Emission control10 Engine management system - MEMS11 Engine management system - PGMFi12 Engine management system - EDC13 Fuel delivery system14 Cooling system15 Cooling system - L Series16 Manifold & exhaust systems17 Clutch18 Manual gearbox - R6519 Manual gearbox - PG120 Automatic gearbox21 Drive shafts22 Steering23 Suspension24 Brakes25 Restraint systems26 Body27 Heating & ventilation28 Air conditioning29 Wipers & washers30 Electrical31 Instruments
Rover 400 Workshop Manual (1995-2000)28 · Air conditioning
28 · Heating & A/C

Trinary pressure switch

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs › Trinary pressure switch
Air conditioningTrinary pressure switch · page 1 of 3

TRINARY PRESSURE SWITCH

Service repair no - 82.20.04

NOTE: Because the receiver drier has to be replaced whenever the air conditioning system is opened, the trinary pressure switch is included in the procedure for renewing the receiver drier. See this section.

EVAPORATOR

Service repair no - 82.25.20

Remove

  1. Recover refrigerant from air conditioning system. See Adjustments.
Evaporator – Recover refrigerant from air conditioning system. See Adjustments.
  1. LH drive: Remove 2 screws and release pipes from support bracket.
Evaporator – LH drive: Remove 2 screws and release pipes from support bracket.
  1. Remove bolt securing air conditioning pipe1 connection to evaporator, use /4 in drive with universal connector and extension.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.