Repairs (page 2 of 2)
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Repairs
ClutchRepairs · page 2 of 2
| A | Assist spring | K | Release bearing |
| B | Pedal pin | L | Dowel pin |
| C | Cotter pin | M | Flywheel |
| D | Oil bolt | N | Clutch disc |
| E | Reservoir | O | Pressure plate |
| F | Clutch master cylinder | P | Gearbox |
| G | Washer | Q | Release fork |
| H | Clutch hose joint | R | Clutch pipe |
| I | Reservoir hose | S | Slave cylinder |
| J | Clutch damper |
Note:
- Whenever the transmission is removed, clean and grease the release bearing sliding surface.
- Bleed the clutch hydraulic system, see Slave Cylinder – Installation.
- Inspect the hoses for damage, leaks, interference and twisting.
Parts & tools for this job For Rover 600
- PARTClutch kitSearch: Rover 600 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Rover 600 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.