Workshop Manuals Factory service & repair Rover
01 Information02 General data03 Engine04 Engine management system – PGM-Fi05 Cooling system, manifold and exhaust06 Clutch07 Manual gearbox08 Automatic gearbox09 Drive shafts10 Differential – manual gearbox11 Differential – automatic gearbox12 Steering13 Suspension14 Brakes and ABS15 Brakes – ABS BY416 Body17 Heating and ventilation18 Electrical19 Supplementary restraint system (SRS)
Rover Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition19 · Supplementary restraint system (SRS)
19 · Body & interior

Fault Finding Intermittent Failures (page 3 of 4)

Make
Rover
Model
600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
Section
Fault finding
Supplementary restraint system (SRS)Fault Finding Intermittent Failures · page 3 of 4
SRS indicator light Diagnostic indicator code blinks Possible cause
Does not come on none Faulty SRS indicator light circuit
Comes on 1 – 1 Open circuit in driver's airbag inflator or increased resistance
1 – 2 Short circuit in another wire in driver's airbag inflator or decreased resistance
1 – 3 Short circuit to power in driver's airbag inflator
1 – 4 Short circuit to earth in driver's airbag inflator
2 – 1 Open circuit in passenger's airbag inflator or increased resistance.
2 – 2 Short circuit to another wire in passenger's airbag inflator or decreased resistance
2 – 3 Short circuit in passenger's airbag inflator
2 – 4 Short circuit to earth in passenger's airbag inflator
5 – 1 Internal failure in the SRS unit
10 – 1 SRS unit replacement code, SRS unit must be replaced
9 – 1
none
Faulty SRS indicator light circuit
9 – 2 Faulty SRS power supply system

Note:

  • If multiple codes including code 5 – 1 are indicated, first fault find all codes except 5 – 1, then erase the memory and recheck the code indication. If code 5 – 1 does not reappear, it is not necessary to replace the SRS unit.
  • When an SRS unit is to be returned in the case of a warranty claim, DO NOT erase the memory. The memory will be retained in the unit.
  • If an intermittent failure occurs, code 9 – 1 will be indicated. In the case of a continuous problem, there will be no code.

Parts & tools for this job For Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.