Front seat (page 2 of 2)

Refit

1. Position seat in vehicle and align rear bolt holes.
2. Fit bolt to rear of each seat slide. Do not tighten.
3. Slide seat backwards and align front bolt holes.
4. Fit bolt to front of each slide and tighten to 45 Nm.
5. Slide seat forwards.
6. Tighten seat slide rear bolts to 45 Nm.
7. Remove service key from slot in pre-tensioner and secure to clip on end of unit.
8. Fit pre-tensioner cover and secure with screw.
9. Adjust seat to central position.