Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K1606 Engine - K16 with VVC07 Emission control08 Engine management system - MEMS09 Fuel delivery system10 Cooling system11 Manifold & exhaust systems12 Clutch13 Manual gearbox - R6514 Manual gearbox - PG115 Automatic gearbox - CVT16 Steering17 Front suspension18 Brakes19 Restraint systems20 Body21 Heating & ventilation22 Air conditioning23 Wipers & washers24 Electrical25 Instruments
Rover 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement03 · Information
03 · General

Fuel system

Make
Rover
Model
Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
Section
General data › Fuel system
InformationFuel system

FUEL SYSTEM

Electronic fuel injection dataSee Engine tuning data.

Fuel Pump

TypeElectric immersible
Pump maximum pressure at 13.5V4.1 bar
Regulated injection pressure range3.0 æ 0.2 bar

COOLING SYSTEM

Pressure cap opens0.9 to 1.2 bar
Thermostat starts to open88° ± 2°C
Thermostat fully open100° ± 2°C
Cooling fan operation:
  Heater carsON - 104°C, OFF - 98
  Air conditioned cars:
  Slow speedOn - 104°C, Off - 98
  Fast speedOn - 112°C, Off - 106

°C

°C °C

NOTE: With air conditioning operating, fans will run at slow speed. Fans may run on for up to 8 minutes if temperature exceeds 112°C at switch off.

CLUTCH

TypeDiaphragm spring, hydraulic operation
Clutch plate diameter:
  1.6200 mm
  1.8215 mm
Friction material wear limit1.5 mm

Parts & tools for this job For Rover Coupé, Cabriolet & Tourer

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.