Steering
- Make
- Rover
- Model
- Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
- Section
- General data › Steering
InformationSteering
STEERING
| Front wheel alignment | Toe-out 0° 10’ |
| Front wheel camber | 0° 20’ ± 10’ negative |
| Front wheel caster | 2°+ 30’ - 0’ |
| King pin inclination | 12° 7’ ± 30’ |
| Steering angle of outer wheel with inner wheel | |
| at 20° | 18° 30’ |
| Turns - lock to lock | 3.4 |
| Rear wheel alignment | Toe-in 0° 11’ |
| Rear wheel camber | 0° 20’ ± 30’ negative |
± 15’ per side
± 7.5’ per side
NOTE: Steering and Suspension geometry settings are for a vehicle at unladen weight.
SUSPENSION
Front
| Type | Independent, MacPherson strut damper with coil spring and anti-roll bar |
| Nominal height to wheel arch from hub centre *: | |
| Coupe models | 394 mm |
| Cabriolet and Tourer | 374 mm |
| Road spring identification (colour code): | |
| Cabriolet models | |
| Manual gearbox without air conditioning | Pink |
| All other | Grey |
| Coupe models | |
| Automatic gearbox with air conditioning | Red |
| All other | Blue |
| Tourer | |
| 1.6 manual gearbox | Pink |
| 1.6 with ABS and air conditioning | Grey |
| 1.6 automatic gearbox | Grey |
| 1.8 VVC without air conditioning | Pink |
| 1.8 VVC with air conditioning | Grey |
| Diesel | Brown |
| Anti-roll bar: | |
| Cabriolet models | 19 mm diameter |
| Coupe and Tourer models | 25 mm diameter |
| Tourer diesel | 23 mm diameter |
* At unladen weight
Parts & tools for this job For Rover Coupé, Cabriolet & Tourer
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Rover power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.