F7: PROGRAMMING

Conditions for Checking

Nominal Value

Ignition ON

Engine OFF

Select F7: Programming in system menu

For the request about whether the correct control unit is installed, proceed according to the instructions or as specified in the latest "Technical Information Bulletins".

For the Omega - B only one ABS control unit can be programmed, the ABS - 2 SH with Traction Control.

Control units without the Traction Control function cannot be programmed.

As the ABS - 2 SH + TC control unit is only installed in conjunction with the X 25 XE and X 30 XE engines, the correct control unit numbers and alpha codes at present are:

          Opel / Vauxhall Part No.:       90 447 588

          Alpha Code:                           XD

EXISTING ECU

PART - NO/AC

If the version code has the status "UNKNOWN", or an incorrect engine / transmission pairing is displayed, the TECH 1 display on the right must be quilted with "NO".

EXISTING ECU

VARIANT - CODING

OKAY?

Select installed system and actuate with "YES"

MT X 25 XE

AT X 25 XE

MT X 30 XE

AT X 30 XE

SELECT

INSTALLED

SYSTEMS!

PROGRAMMING

VARIANT - CODING

PLEASE WAIT!

VARIANT - CODING SUCCESSFULLY PROGRAMMED!

Confirm the previously selected engine / transmission version in the TECH 1 display with "YES"

EXISTING ECU

VARIANT - CODING

OKAY?