Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat 500 Factory Service Manual (2007-2024)16 · Electrical equipment
16 · Electrical

Ignition coil resistance check

Make
Fiat
Model
500 Factory Service Manual
Year
2007–2024
Section
Engine ignition › Ignition coil resistance check
Electrical equipmentIgnition coil resistance check

IGNITION COIL RESISTANCE CHECK

Check 5510OB

1.4 16v

Connect to the terminals of the primary winding circuit between pins 1 and 3 and check the resistance readings fall within the following values:

Minimum value: 0.52 Ohms.

Maximum value: 0.62 Ohms.

IGNITION COIL RESISTANCE CHECK

Ignition coil connector

For the secondary winding circuit check carry out the

See Test 5510CI IGNITION COIL OPERATION CHECK

Parts & tools for this job For 2007 Fiat 500

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.