Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat 500 Factory Service Manual (2007-2024)08 · Engine
08 · Engine

Front fuel delivery line - r.r.

Make
Fiat
Model
500 Factory Service Manual
Year
2007–2024
Section
Fuel tank and pipes › Front fuel delivery line - r.r.
EngineFront fuel delivery line - r.r.

FRONT FUEL DELIVERY LINE - R.R.

Operation 1040B32 · FUEL SUPPLY/RETURN CIRCUIT PIPE

1.2 8v

Removing

- Position the vehicle on a lift.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1040E22 FUEL PIPE PROTECTION - R.R

1. Discharge the fuel pressure from the single fuel manifold pipe using the special tool.

ToolDescriptionFunctionValidity
1.870.684.000Quick coupling connectorPressure exhaust on single fuel manifold pipe

1.2 8V

1.4 16V

FRONT FUEL DELIVERY LINE - R.R.

1. Working the rapid connector, disconnect the fuel supply pipe to the single manifold pipe.

FRONT FUEL DELIVERY LINE - R.R.

1. Working underneath the vehicle, disconnect the rapid connector (1a) in the join section between the front pipe (1b) and the rear pipe (1c) for the fuel supply pipe.

FRONT FUEL DELIVERY LINE - R.R.

- Remove the pipe from its housing releasing it from the retaining clips.

Refitting

- Check that the pipe is not damaged. If it is, replace it.

- Working underneath the vehicle, connect the rapid connector in the join section between the front pipe and the rear pipe for the fuel supply pipe.

- Working the rapid connector, connect the fuel supply pipe to the single manifold pipe.

Op. 1040E22 FUEL PIPE PROTECTION - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

- Remove the vehicle from the lift.

1.4 16v

Removing

- Position the vehicle on a lift.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R

Op. 1040E22 FUEL PIPE PROTECTION - R.R

1. Discharge the fuel pressure from the single fuel manifold pipe using the special tool.

ToolDescriptionFunctionValidity
1.870.684.000Quick coupling connectorPressure exhaust on single fuel manifold pipe

1.2 8V

1.4 16V

FRONT FUEL DELIVERY LINE - R.R.

1. Working on the rapid connector, disconnect the fuel supply pipe to the single manifold pipe.

FRONT FUEL DELIVERY LINE - R.R.

1. Working underneath the vehicle, disconnect the rapid connector (1a) in the section where the front pipe (1b) and the rear pipe (1c) for the fuel supply pipe are joined.

FRONT FUEL DELIVERY LINE - R.R.

- Remove the pipe from its seat releasing it from the retaining clips.

Refitting

- Check that the pipe is not damaged. If it is, replace it.

- Working underneath the vehicle, connect the rapid connector in the section where the front pipe and the rear pipe for the fuel supply pipe are joined.

- Working on the rapid connector, connect the fuel supply pipe to the single manifold pipe.

Op. 1040E22 FUEL PIPE PROTECTION - R.R

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

- Remove the vehicle from the lift.

Parts & tools for this job For 2007 Fiat 500

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.