ENGINE COOLANT SUPPLY RESERVOIR - R.R.

Operation 1088B10 · ENGINE COOLING RADIATOR

1.9 Multijet

Removing

- Position the vehicle on a lift.

Op. 0010T20 ENGINE COOLANT - CHANGE

1. Loosen the band and disconnect the degassing pipe from the tank.

2. Loosen the band and disconnect the system supply pipe.

3. Undo the nuts (3a) and remove the engine coolant supply reservoir (3b).

Refitting

- Fit the engine cooling radiator in place and secure it using the bolts.

- Connect the supply pipe to the tank.

- Connect the degassing pipe to the tank.

Op. 0010T20 ENGINE COOLANT - CHANGE

- Remove the vehicle from the lift.

1.2 8v, 1.4 8v

Removing

- Position the vehicle on a lift.

Op. 0010T20 ENGINE COOLANT - CHANGE

1. Loosen the band and disconnect the degassing pipe from the tank.

2. Loosen the band and disconnect the system supply pipe.

3. Undo the nuts (3a) and remove the engine coolant supply reservoir (3b).

Refitting

- Fit the engine cooling radiator in place and secure it using the bolts.

- Connect the supply pipe to the tank.

- Connect the degassing pipe to the tank.

Op. 0010T20 ENGINE COOLANT - CHANGE

- Remove the vehicle from the lift.

1.3 Multijet

Removing

- Position the vehicle on a lift.

Op. 0010T20 ENGINE COOLANT - CHANGE

1. Loosen the band and disconnect the degassing pipe from the tank.

2. Loosen the band and disconnect the system supply pipe.

3. Undo the nuts (3a) and remove the engine coolant supply reservoir (3b).

Refitting

- Fit the engine cooling radiator in place and secure it using the bolts.

- Connect the supply pipe to the tank.

- Connect the degassing pipe to the tank.

Op. 0010T20 ENGINE COOLANT - CHANGE

- Remove the vehicle from the lift.