Water pump - r + r
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Engine cooling › Water pump - r + r
WATER PUMP - R + R
Removing
Op. 0010T20 ENGINE COOLANT - CHANGE
Op. 4450B04 RIGHT FRONT WHEEL - R.R
Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.
Op. 1092G10 SINGLE ENGINE BELT - R.R
1. Undo the nuts (1a) and remove the coolant pump (1b) complete with gasket.
Refitting
- Place the water pump, complete with gasket in position, then tighten the bolts to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Water pump | Nut | M6 | 0.8 ÷ 1.0 | 1.3 Multijet |
Op. 1092G10 SINGLE ENGINE BELT - R.R
Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.
Parts & tools for this job For 2005 Fiat Grande Punto
- FLUIDCoolantSearch: Fiat coolant antifreeze
- PARTThermostatSearch: Fiat Grande Punto 2005 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.