FANS WITH SINGLE ENGINE DUCT - R+R

Operation 1088E11 · COOLANT TEMPERATURE CONTROL DEVICES

1.9 Multijet

Removing

- Disconnect the negative battery terminal.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 5540B07 LEFT FRONT HEADLAMP - R.R

Op. 5540B08 RIGHT FRONT HEADLAMP - R.R

Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER

Op. 7210E10 R.R. FRONT BUMPER

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

1. Disconnect the rapid connector for the radiator upper coolant inlet hose, radiator side.

1. Remove the fan heat shields.

- Open the clips securing the wiring to the fan frame.

2. Disconnect the fan wiring electrical connections.

3. Disconnect the electrical connections from the rheostats.

1. Loosen the band and disconnect the reservoir coolant outlet hose.

2. Unscrew the bolts securing the coolant reservoir and move aside.

1. Undo the fixing bolts (1a), withdraw pins (1b) and remove fans (1c).

Refitting

- Position the fans in their seats and secure them using the fixing bolts and pins.

- Place the coolant reservoir in its housing and secure it using the bolts.

- Connect the coolant outlet pipe to the reservoir and tighten the band.

- Connect the electrical connections to the rheostats.

- Connect the fan wiring electrical connections.

- Do up the clips securing the wiring to the fan frame.

- Place the heat shields in their housings.

- Connect the rapid connector for the radiator upper coolant inlet hose, radiator side.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R

Op. 7210E10 R.R. FRONT BUMPER

Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER

Op. 5540B08 RIGHT FRONT HEADLAMP - R.R

Op. 5540B07 LEFT FRONT HEADLAMP - R.R

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

- Connect the negative battery terminal.