TIMING SYSTEM CHAIN TENSIONER PAD - R.R.

Operation 1032C40 · TIMING SYSTEM TENSIONERS

1.3 Multijet

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 0010T12 ENGINE OIL AND FILTER - REPLACE

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R

Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION

Op. 1020B10 COVER FOR TIMING SYSTEM WITH CHAIN DRIVE - R.R AND REPLACE GASKET

Op. 1032A12 TIMING SYSTEM DRIVE CHAIN - R.R

PROCEED AS FOLLOWS FOR MOBILE PADS

1. Undo the pin (1a) and remove the timing chain mobile pad (1b).

PROCEED AS FOLLOWS FOR FIXED PAD

1. Undo the bolts (1a) and remove the timing chain fixed pad (1b).

Refitting

PROCEED AS FOLLOWS FOR FIXED PAD

- Place the timing chain fixed pad back in its housing and secure it using the bolts.

PROCEED AS FOLLOWS FOR MOBILE PADS

- Place the timing chain mobile pad back in its housing and secure it using the pin.

Op. 1032A12 TIMING SYSTEM DRIVE CHAIN - R.R

Op. 1020B10 COVER FOR TIMING SYSTEM WITH CHAIN DRIVE - R.R AND REPLACE GASKET

Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION

Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 0010T12 ENGINE OIL AND FILTER - REPLACE