HYDRAULIC TAPPETS (ALL) R.R

Operation 1036H57 · TAPPETS AND ROCKER SHAFTS

1.3 Multijet

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1060G90 SYSTEM CABLE LOOM - R.R.

Op. 1084B40 ENGINE OIL DELIVERY PIPE TO TURBOCHARGER - R + R

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R

Op. 1084B42 ENGINE OIL RETURN PIPE FROM TURBO - R + R

Op. 1064A11 TURBOCHARGER WITH CATALYTIC CONVERTER - R.R.

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1016B10 SINGLE CAMSHAFT HOUSING - REPLACE GASKET

1. Remove the valve rockers.

2. Remove the hydraulic tappets.

Refitting

- Lubricate hydraulic tappets with engine oil, then place them in their housings.

Position the hydraulic tappets with the oil channel hole turned toward the outside of the lower cylinder head: this position brings the hole into communication with the oil duct on the lower cylinder head.

- Place the valve rockers in their housings.

Op. 1016B10 SINGLE CAMSHAFT HOUSING - REPLACE GASKET

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1064A11 TURBOCHARGER WITH CATALYTIC CONVERTER - R.R.

Op. 1084B42 ENGINE OIL RETURN PIPE FROM TURBO - R + R

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R

Op. 1084B40 ENGINE OIL DELIVERY PIPE TO TURBOCHARGER - R + R

Op. 1060G90 SYSTEM CABLE LOOM - R.R.

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R