Valve tappets - adjustment following clearance check
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Timing system › Valve tappets - adjustment following clearance check
VALVE TAPPETS - ADJUSTMENT FOLLOWING CLEARANCE CHECK
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.
Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R
Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R
Op. 5510C14 IGNITION COIL/S - R.R.
Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.
Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET
Op. 1036H14 VALVE TAPPETS - CHECK CLEARANCE
- Lower the tappet in question using the tool.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 1860443000 | Lever | Lower tappets | 1.2 8v 1.4 8v 1.9 Multijet |
- Fit the tool for keeping the tappet lowered, then withdraw the pressure lever.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 1860724001 | Lever | Lower tappets | 1.9 Multijet 1.4 8v 1.2 8v |
- Remove the valve clearannce adjustment shim and replace it with a one of a suitable thickness.
- Remove the tool for keeping the tappet lowered.
- Proceed in the same way for the remaining valves.
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTEngine gasket setSearch: Fiat Grande Punto 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.