HEADLAMP WASHER FUNCTIONAL DESCRIPTION

2.0 16V JTD, 2.2 16V JTD · MY 2005

The headlamp washer function is switched on by activating the windscreen wipers with the dipped headlamps on.

The steering wheel node control unit M093 receives a power supply (pin 5 connector A and pin 4 connector D) from the Body computer node M001 (pin 11 connector B and pin 1 connector G respectively) via two lines of which only the second is protected by fuse F04.

The command for switching on the headlamp washer function is supplied from the steering wheel node control unit M093 (pins 1 and 3 of connector A) to the Body computer node M001 (pins 5 and 3 of connector G respectively). The signal always travels via the CAN line.

The Body computer node M001, in turn, transmits the signal (pins 25 and 27 of connector E), via the CAN line, to the engine compartment junction unit B001 (pins 12 and 11 respectively of connector F).

The headlamp electric pump motor N025 (pin 2) is supplied by means of pin 1 of connector G of the engine compartment junction unit B001 via a line protected by fuse F04.

In addition to being protected by a specific fuse, the power supply provided is operated by a special relay also housed in the engine compartment junction unit B001.