Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)24 · Body
24 · Body & interior

Cable - interior door release - rear door

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Doors › Cable - interior door release - rear door
BodyCable - interior door release - rear door

CABLE - INTERIOR DOOR RELEASE - REAR DOOR

Service repair no - 76.37.61

Remove

  1. Remove rear door latch. See this section.
Cable - interior door release - rear door – Remove rear door latch. See this section.
  1. Release cable from door release and remove cable.

Refit

  1. Connect and secure cable to door release.
  2. Fit door latch. See this section.

FINISHER - UPPER - TAIL DOOR GLASS

Service repair no - 76.43.74

Remove

  1. Remove tail door glass side finishers. See this section.
Finisher - upper - tail door glass – Remove tail door glass side finishers. See this section.
  1. Release 5 clips securing finisher to bracket.
  2. Remove tail door glass upper finisher.
  3. Remove and discard clips from finisher and/or bracket.

Refit

  1. Fit NEW clips to finisher.
  2. Fit finisher and secure clips to bracket.
  3. Fit tail door glass side finishers. See this section.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.