Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)24 · Body
24 · Body & interior

Door release - interior - rear door

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Doors › Door release - interior - rear door
BodyDoor release - interior - rear door

DOOR RELEASE - INTERIOR - REAR DOOR

Service repair no - 76.37.32

Remove

  1. Remove rear door water shedder. See this section.
Door release - interior - rear door – Remove rear door water shedder. See this section.
  1. Release cable from door release.
  2. Drill out 2 rivets from door release.
  3. Remove door release.

Refit

  1. Connect cable to door release.
  2. Position door release and secure with rivets.
  3. Fit water shedder. See this section.

CABLE - INTERIOR DOOR RELEASE - FRONT DOOR

Service repair no - 76.37.60

Remove

  1. Remove front door latch. See this section.
Cable - interior door release - front door – Remove front door latch. See this section.
  1. Release cable from interior door release and remove cable.

Refit

  1. Connect cable to interior door release.
  2. Fit door latch. See this section.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.